Spare parts manuals - Sabroe Spare parts manual - SMC/TSMC 100 Mk 4 LL 011684 en 2018.02 3/56 Manual for SMC and TSMC Mk 4 LL Manual for SMC and TSMC Mk 4 LL Compressor type SMC TSMC S L E 104 106 108 112 116 Compressor no. Refrigerant R717 R22 R134a R404A R507 Other Control Unisab III.
- Sabroe products are recognised and respected throughout the world for their build quality, long-term operating reliability and cost-effectiveness. Last but not least, the unique combination of Sabroe (York)'s consistent focus on low life cycle costs and world-leading expertise in the use of naturally occurring refrigerants has made Sabroe a.
- Sabroe SMC 100 Mk 5 reciprocating compressors are ideal for use in medium-size industrial and marine refrigeration installations. The well-proven Sabroe SMC 100 range consists of fifteen different models covering capacities of between 200 and 1350 m³/h swept volume at 1500 rpm maximum speed.
Description for compressors SMC 186-188, TSMC 188
The SMC 180 and TSMC 180 compressors have 180 mm diameter pistons, as indicated by the first digits in the type designation and with a stroke length of 140 mm. The number of cylinders in the compressor block is indicated by the following digit, where, for example, SMC 188 is an 8-cylinder compressor. SMC 180 is a one-stage compressor which compresses the gas in one single stage.
In the TSMC 188 two-stage compressor, the gas is compressed in two stages at a ratio of 1:3 between the number of high- and lowpressure cylinders. Thus, a TSMC 188 has 2 high-pressure cylinders and 6 low-pressure cylinders.
The type can be determined by the nameplate, located on the end face of the compressor, facing away from the coupling/belt drive. The following illustration shows a SABROE name-plate.
You can find detailed information on our website:http://coolref.ru/EN
Schemes
Spare parts for SMC 186-188, TSMC 188
| Spare parts for SMC 186 - 188 & TSMC 188 | ||||||
| Relevant drawings SMC: | 0661-606-0661-608 | |||||
| Relevant drawings TSMC: | 0661-607-0661-608 | |||||
| Pos. | Designation | Weight | Number each compressor | Part no. | ||
| each in kg | SMC 186 | SMC 188 | TSMC 188 | |||
| Compressor frame | ||||||
| 1A-1 | Frame SMC 186 | 1 | 3111-072 | |||
| 1A-2 | Frame SMC 188 | 1 | 3111-073 | |||
| 1A-3 | Frame TSMC 188 | 1 | 3111-074 | |||
| 1B-1 | Oil sight glass | 0,230 | 1 | 1 | 1 | 1226-015 |
| 1C-1 | O-ring 52,07 x 2,62 | 0,002 | 1 | 1 | 1 | 1331-140 |
| 1D-1 | Hexagon screw M6 x 18 - 8,8 DIN 933 | 0,010 | 4 | 4 | 4 | 1424-148 |
| Top cover - air cooled | ||||||
| 2A-1 | Top cover | 2 | 3 | 2 | 3113-150 | |
| 2A-2 | Top cover with flange for valve | 1 | 1 | 2 | 3113-149 | |
| 2C-1 | Gasket for top cover | 0,125 | 3 | 4 | 4 | 2353-222 |
| 2E-1 | Hexagon head screw M20 x 130 - 8,8 DIN 931 | 0,360 | 46 | 62 | 60 | 1424-122 |
| 2F-1 | Hexagon head screw M20 x 190 - 8,8 DIN 931 | 0,510 | 2 | 2 | 4 | 1424-128 |
| 2G-1 | Washer 37/21 x 3 | 0,020 | 48 | 64 | 64 | 1436-077 |
| Top cover - water cooled | ||||||
| 2A-1 | Top cover | 2 | 3 | 2 | 3113-150 | |
| 2A-2 | Top cover with flange for valve | 1 | 1 | 2 | 3113-149 | |
| 2B-1 | Water cover | 3 | 4 | 4 | 3113-151 | |
| 2C-1 | Gasket for top cover | 0,125 | 3 | 4 | 4 | 2353-222 |
| 2D-1 | Gasket for water cover | 0,210 | 3 | 4 | 4 | 2353-157 |
| 2E-1 | Hexagon head screw M20 x 130 | 0,360 | 4 | 6 | 4 | 1424-122 |
| 2E-2 | Hexagon head screw M20 x 160 - 8,8 DIN 931 | 0,400 | 42 | 56 | 56 | 1424-125 |
| 2F-1 | Hexagon head screw M20 x 190 - 8,8 DIN 931 | 0,510 | 2 | 2 | 4 | 1424-128 |
| 2G-1 | Washer 37/21 x 3 | 0,020 | 48 | 64 | 64 | 1436-077 |
| 2H-1 | Hexagon head screw M12 x 50 - 8,8 DIN 933 | 0,050 | 21 | 28 | 28 | 1424-219 |
| 2J-1 | Washer dia. 24/13x2,5 | 0,008 | 21 | 28 | 28 | 1434-036 |
| Side cover - water cooled | ||||||
| 3A-2 | Side cover with cooling fins | 2 | 2 | 2 | 3113-153 | |
| 3B-1 | Water cover | 2 | 2 | 2 | 3113-151 | |
| 3C-1 | Gasket for side cover | 0,125 | 2 | 2 | 2 | 2353-156 |
| 3D-1 | Gasket for water cover | 0,210 | 2 | 2 | 2 | 2353-157 |
| 3E-2 | Hexagon head screw M20 x 80 - 8,8 DIN 933 | 0,240 | 28 | 28 | 28 | 1424-293 |
| 3E-1 | Hexagon head screw M20 x 50 - 8,8 DIN 933 | 4 | 4 | 4 | 1424-287 | |
| 3G-1 | Washer dia. 37/21 x 3 | 0,020 | 32 | 32 | 32 | 1436-077 |
| 3H-1 | Hexagon head screw M12 x 50 - 8,8 DIN 933 | 0,050 | 6 | 6 | 6 | 1424-219 |
| 3J-1 | Washer dia. 24/13x2,5 | 0,080 | 6 | 6 | 6 | 1436-036 |
| End cover at pump end | ||||||
| 4A-1 | End cover at pump end | 1 | 1 | 1 | 3113-155 | |
| 4B-1 | Gasket for end cover | 0,135 | 1 | 1 | 1 | 2353-158 |
| 4C-1 | Hexagon head cover M20 x 140 - 8,8 DIN 931 | 0,360 | 14 | 14 | 14 | 1424-123 |
| 4D-1 | Washer dia. 37/21 x 3 | 0,020 | 14 | 14 | 14 | 1436-077 |
| Bearing cover at pump | ||||||
| 5A-1 | Bearing cover at pump | 1 | 1 | 1 | 3113-033 | |
| 5B-1 | Hexagon head screw M20 x 40 - 8,8 DIN 933 | 0,120 | 6 | 6 | 6 | 1424-285 |
| 5C-1 | Bushing with collar | 4,280 | 1 | 1 | 1 | 2132-023 |
| 5C-2 | Bushing for repair (1,0 mm undersize) | 4,280 | 1 | 1 | 1 | 2132-024 |
| 5D-1 | Gasket for bearing cover 0,25 mm | 0,015 | 2353-016 | |||
| 5D-2 | Gasket for bearing cover 0,50 mm | 0,018 | 2353-017 | |||
| 5D-3 | Gasket for bearing cover 0,75 mm | 0,021 | 2353-018 | |||
| 5E-1 | Spring dowel sleeve dia. 8x16 - DIN 1481 | 0,030 | 1 | 1 | 1 | 1446-009 |
| Bearing cover at shaft seal end | ||||||
| 6A-1 | Bearing cover | 1 | 1 | 1 | 3113-152 | |
| 6B-1 | Hexagon head screw M20 x 100 - 8,8 DIN | 0,340 | 14 | 14 | 14 | 1424-119 |
| 6C-1 | Bushing with collar | 4,280 | 1 | 1 | 1 | 2132-023 |
| 6C-2 | Bushing for repair (1,0 mm undersize) | 4,280 | 2 | 2 | 2 | 2132-024 |
| 6D-1 | Gasket | 0,065 | 1 | 1 | 1 | 2353-161 |
| 6E-1 | Washer dia. 37/21 x 3 | 0,020 | 14 | 14 | 14 | 1436-077 |
| 6F-1 | Spring dowel sleeve dia. 8x16- DIN 1481 | 0,030 | 1 | 1 | 1 | 1446-009 |
| 6G | Valve for prelubrication | 1 | 1 | 1 | 2412-585 | |
| 6H | Nut | 1 | 1 | 1 | 2313-045 | |
| 6J | Special joint | 1 | 1 | 1 | 2334-027 | |
| 6K | Cap | 1 | 1 | 1 | 2313-027 | |
| 6L | Joint 3/8' | 1 | 1 | 1 | 1349-053 | |
| 6M | Alu gasket | 1 | 1 | 1 | 2356-123 | |
| Shaft seal cover | ||||||
| 8A-1 | Shaft seal cover | 1 | 1 | 1 | 3113-154 | |
| 8B-1 | Gasket | 0,036 | 1 | 1 | 1 | 2353-006 |
| 8C-1 | Hexagon head M14 x 40 | 0,022 | 8 | 8 | 8 | 1424-241 |
| 8D-1 | Hose connection 1/4' | 0,003 | 1 | 1 | 1 | 1345-143 |
| 8E-1 | Plastic hose 3/16' x 400 mm | 0,001 | 1 | 1 | 1 | 1241-190 |
| 8F | Cylindrical pin dia. 3x12 | 0,001 | 1 | 1 | 1 | 1445-054 |
| Shaft seal | ||||||
| 10 | Shaft seal complete | 6,370 | 1 | 1 | 1 | 3126-138 |
| 10A-1 | Slide ring (special carbon) | 0,452 | 1 | 1 | 1 | 3126-135 |
| 10B-1 | Sealing ring Variseal M dia. 146,1 | 0,010 | 1 | 1 | 1 | 1331-522 |
| 10C-1 | O-ring dia, 151,99x3,53 | 0,006 | 1 | 1 | 1 | 1331-099 |
| 10D-1 | Slide ring (cast iron) | 3,385 | 1 | 1 | 1 | 3126-136 |
| 10E-1 | O-ring dia. 129,5x7 | 0,030 | 1 | 1 | 1 | 2353-177 |
| 10G-1 | Spring | 0,009 | 12 | 12 | 12 | 2142-004 |
| 10H-1 | Cone ring | 1,925 | 1 | 1 | 1 | 3126-137 |
| 10J-1 | Special screw | 0,024 | 3 | 3 | 3 | 1413-001 |
| 10K-1 | Spiroloxring RS 500 dia. 127 | 0,034 | 1 | 1 | 1 | 1437-298 |
| 10L-1 | Nut M8 | 0,004 | 3 | 3 | 3 | 1432-063 |
| 10M-1 | Lock washer dia. 15/8,4 x 0,8 | 0,002 | 3 | 3 | 3 | 1437-054 |
| Oil pump | ||||||
| 11-1 | Oil pump, complete | 10,80 | 1 | 1 | 1 | 3141-130 |
| 11A-1 | Housing | 5,400 | 1 | 1 | 1 | 3141-008 |
| 11B-1 | Cover | 2,920 | 1 | 1 | 1 | 3141-012 |
| 11C-1 | Gasket for cover 0,2 mm | 0,001 | 1 | 1 | 1 | 2353-022 |
| 11D-1 | Heaxagon head screw M10 x 40 - 8,8 DIN 933 | 0,030 | 4 | 4 | 4 | 1424-194 |
| HE-1 | Spring washer dia. 17/10 x 2,2 - DIN 127 | 0,002 | 8 | 8 | 8 | 1437-080 |
| 11F-1 | Cylindrical pin dia. 6 x 36 | 0,040 | 2 | 2 | 2 | 1445-061 |
| 11G-1 | Pump gear wheel | 1,080 | 1 | 1 | 1 | 3141-044 |
| 11H-1 | Pump gear wheel | 1,260 | 1 | 1 | 1 | 3141-045 |
| 11J-1 | Key 6x6x15 | 0,005 | 1 | 1 | 1 | 1526-051 |
| 11K-1 | Threaded nipple 12x1 1/8' | 0,418 | 2 | 2 | 2 | 2311-043 |
| 11L-1 | Gasket for nipple dia. 50/40 x 1,5 | 0,002 | 2 | 2 | 2 | 2356-056 |
| 11AB-1 | Hexagon head screw M10 x 40 - 8,8 DIN 933 | 0,030 | 4 | 4 | 4 | 1424-194 |
| Chain drive | ||||||
| 11M-1 | Chain wheel 1/2' x 25 (pump) | 0,750 | 1 | 1 | 1 | 2126-022 |
| 11N-1 | Washer dia. 30/17x3 | 0,005 | 1 | 1 | 1 | 1436-017 |
| 11P-1 | Locking nut M 16 | 0,040 | 1 | 1 | 1 | 1433-083 |
| 11Q-1 | Chain wheel 1/2' x 28 (crankshaft) | 0,470 | 1 | 1 | 1 | 2126-023 |
| 11R-1 | Hub for chainwheel | 0,730 | 1 | 1 | 1 | 2126-024 |
| 11 S-1 | Hexagon head screw M14 x 40 - 8,8 DIN 933 | 0,945 | 2 | 2 | 2 | 1424-241 |
| 11T-1 | Spring washer dia. 23/14 x 3 | 0,004 | 2 | 2 | 2 | 1437-030 |
| 11U-1 | Chain 1/2' 58 endless | 0,510 | 1 | 1 | 1 | 1521-105 |
| 11V-1 | Guide shield for oil | 0,380 | 1 | 1 | 1 | 3141-136 |
| 11X-1 | Hexagon head screw M6 x 12 | 0,003 | 2 | 2 | 2 | 1413-339 |
| 11Y-1 | Spring washer dia. 11,1/6,1 x 1,6 | 0,005 | 2 | 2 | 2 | 1437-022 |
| Unloading cylinder SMC • TSMC (LP) See drawing no 0661-602 | ||||||
| 12-1 | Unloading cylinder complete L = 122, S = 49 | 8,400 | 1 | 1 | 3135-019 | |
| 12-2 | Unloading cylinder complete L = 167, S = 94 | 8,500 | 1 | 1 | 1 | 3135-020 |
| 12-3 | Unloading cylinder complete L = 212, S = 139 | 8,600 | 1 | 1 | 1 | 3135-021 |
| 12-4 | Unloading cylinder complete L = 257, S = 184 | 8,700 | 1 | 1 | 3135-022 | |
| 12A-1 | Unloading cylinder SMC -TSMC (LP) | 6,700 | 3 | 4 | 3 | 3135-030 |
| 12B-1 | Piston | 0,800 | 3 | 4 | 3 | 3135-035 |
| 12C-1 | Piston rod L= 122 | 0,200 | 1 | 1 | 3135-046 | |
| 12C-2 | Piston rod L= 167 | 0,250 | 1 | 1 | 1 | 3135-047 |
| 12C-3 | Piston rod L= 212 | 0,300 | 1 | 1 | 1 | 3135-048 |
| 12C-4 | Piston rod L= 257 | 0,350 | 1 | 1 | 3135-049 | |
| 12D-1 | Threaded plug - 3/8' BSP | 0,065 | 3 | 4 | 3 | 2314-025 |
| 12E-1 | Gasket dia. 25/17x1,5 | 0,002 | 3 | 4 | 3 | 2356-130 |
| 12F-1 | Seeger ring dia. 85 | 0,030 | 3 | 4 | 3 | 1437-165 |
| 12G-1 | Spring guide | 0,100 | 3 | 4 | 3 | 2145-005 |
| 12H-1 | Spring retainer | 0,200 | 3 | 4 | 3 | 3135-058 |
| 12J-1 | Spring dia. 4/40 x 88 | 0,100 | 3 | 4 | 3 | 2142-041 |
| 12J-2 | Spring dia. 5/55 x 88 | 0,170 | 3 | 4 | 3 | 2142-042 |
| 12K-1 | Benzing ring dia. 12 | 0,001 | 3 | 4 | 3 | 1437-108 |
| 12K-2 | Benzing ring dia. 9 | 0,001 | 3 | 4 | 3 | 1437-105 |
| 12T-1 | O-ring neoprene dia. 142,7 x 3,5 | 0,010 | 3 | 4 | 3 | 1331-096 |
| 12U-1 | Hexagon head screw M14 x 50 | 0,075 | 12 | 16 | 12 | 1424-243 |
| 12V-1 | Washer dia. 28/15x2,5 | 0,010 | 12 | 16 | 12 | 1436-037 |
| Unloading cylinder TSMC (HP) See drawing no 0661-602 | ||||||
| 12-5 | Unloading cylinder complete TSMC (HP) | 9,200 | 1 | 3135-165 | ||
| 12A-2 | Unloading cylinder | 8,800 | 1 | 3135-032 | ||
| 12B-1 | Piston | 0,800 | 1 | 3135-035 | ||
| 12C-5 | Piston rod for TSMC (HP) | 0,200 | 1 | 3135-166 | ||
| 12D-1 | Threaded plug 3/8' BSP | 0,065 | 1 | 2314-025 | ||
| 12E-1 | Gasket dia. 25/17x1,5 | 0,002 | 1 | 2356-130 | ||
| 12G-5 | Spring guide | 0,110 | 1 | 3135-095 | ||
| 12H-5 | Cover | 0,690 | 1 | 3135-106 | ||
| 12J-1 | Spring dia. 4/40 x 88 | 0,100 | 1 | 2142-041 | ||
| 12J-2 | Spring dia. 5/55 x 88 | 0,170 | 1 | 2142-042 | ||
| 12K-5 | Benzing ring dia. 9 | 0,001 | 2 | 1437-105 | ||
| 12N-1 | Gasket for cover dia. 110/80 x 1 | 0,025 | 1 | 2353-026 | ||
| 12P-1 | Hexagon head screw M6 x 20 | 0,009 | 6 | 1424-152 | ||
| 12Q-1 | O-ring neoprene PRP 112 | 0,001 | 1 | 1331-013 | ||
| 12R-1 | Self locking nut 3/8' INF | 0,010 | 1 | 1433-100 | ||
| 12S-1 | Washer dia. 21/10,5x2 | 0,005 | 1 | 1436-035 | ||
| 12T-1 | O-ring neoprene dia. 142,7 x 3,5 | 0,010 | 1 | 1331-096 | ||
| 12U-1 | Hexagon head screw M14 x 50 | 0,075 | 4 | 1424-243 | ||
| 12V-1 | Washer dia. 28/15 x 2,5 | 0,010 | 4 | 1436-037 | ||
| Frame for unloading mechanism | ||||||
| 13A-1 | Suspension rod (right) | 1,340 | 3 | 4 | 4 | 3135-067 |
| 13B-1 | Suspersion rod (left) | 1,340 | 3 | 4 | 4 | 3135-068 |
| 13C-1 | Cross piece at piston rod | 1,240 | 3 | 4 | 4 | 3135-077 |
| 13D-1 | Cross piece | 1,220 | 3 | 4 | 4 | 3135-083 |
| 13E-1 | Counter sunk screw M6 x 25 | 0,006 | 12 | 16 | 16 | 1413-100 |
| Bracket for unloading mechanism | ||||||
| 14A-1 | Bracket with pin | 0,250 | 6 | 8 | 7 | 3135-061 |
| 14B-1 | Spacing ring for bracket | 0,015 | 12 | 16 | 14 | 2124-005 |
| 14C-1 | Hexagon head screw M8 x 45 | 0,010 | 12 | 16 | 14 | 1424-172 |
| 14D-1 | Spring washer | 0,002 | 12 | 16 | 14 | 1437-023 |
| Rocker for unloading mechanism | ||||||
| 15A-1 | Rocker arm | 0,100 | 12 | 16 | 16 | 3135-097 |
| 15B-1 | Bearing cup (without thread) | 0,020 | 12 | 16 | 12 | 3135-100 |
| 15B-2 | Bearing cup (with thread) TSMC HP | 0,035 | 4 | 3135-102 | ||
| 15C-1 | Spring holders | 0,002 | 12 | 16 | 16 | 2145-002 |
| 15D-1 | Spring | 0,052 | 12 | 16 | 16 | 2142-046 |
| 15E-1 | Washer for regulation of bearing cup | 0,004 | 3142-016 | |||
| Crankshaft | ||||||
| *16-1 | Crankshaft SMC186 | 213,000 | 1 | 3121-118 | ||
| *16-2 | Crankshaft SMC 188-TSMC 188 | 223,000 | 1 | 1 | 3121-119 | |
| 16A-1 | Lock washer | 1,890 | 1 | 1 | 1 | 3121-117 |
| 16B-1 | Hexagon head screw M14 x 45 - 8,8 DIN 933 | 0,010 | 2 | 2 | 2 | 1424-242 |
| 16C-1 | Spring washer dia. 23,3/14,2 x 3 | 0,004 | 2 | 2 | 2 | 1437-030 |
| 16D-1 | Key 32x18x100 | 0,360 | 1 | 1 | 1 | 2123-007 |
| Connecting rod | ||||||
| *17-1 | Connecting rod, complete, SMC-TSMC LP | 12,300 | 6 | 8 | 6 | 3123-005 |
| *17-2 | Connecting rod, complete, TSMC HP | 12,300 | 2 | 3123-103 | ||
| *17-3 | Connecting rod with piston complete, TSMC HP | 19,200 | 2 | 3123-104 | ||
| 17A-1 | Half-section of bearing | 0,180 | 12 | 16 | 16 | 2133-005 |
| 17A-2 | Half-section of bearing for repair | 0,180 | 12 | 16 | 16 | 2133-006 |
| 17B-1 | Bushing for piston pin, SMC-TSMC LP | 1,140 | 6 | 8 | 6 | 2132-006 |
| 17B-2 | Needle roller bearing TSMC HP | 0,370 | 4 | 1511-006 | ||
| 17C-1 | Connection rod bolt | 0,200 | 12 | 16 | 16 | 2111-066 |
| 17D-1 | Self lock nut 5/8' UNF | 0,030 | 12 | 16 | 16 | 1433-118 |
| Piston See drawing no 0661-602 | ||||||
| 18-1 | Piston with pin and rings | 6,075 | 6 | 8 | 8 | 3124-053 |
| 18A-1 | Piston pin | 1,965 | 6 | 8 | 8 | 3125-119 |
| 18C-1 | Piston ring TOP mark | 0,105 | 12 | 16 | 16 | 3125-128 |
| 18D-1 | Oil scraper ring | 0,115 | 6 | 8 | 8 | 3125-077 |
| 18E-1 | Seeger ring dia. 70 mm | 0,020 | 12 | 16 | 16 | 1437-159 |
| Cylinder liner with suction valve See drawing no 0661-602 | ||||||
| 19-1 | Cylinder liner with suction valve R717 | 26,480 | 6 | 8 | 6 | 3112-067 |
| 19-2 | Cylinder liner with suction valve HCFC | 26,480 | 6 | 8 | 6 | 3112-069 |
| 19-3 | Cylinder liner with suction valve R717 TSMC HP | 26,340 | 2 | 3112-068 | ||
| 19-4 | Cylinder liner with suction valve HCFC TSMC HP | 26,340 | 2 | 3112-070 | ||
| 19A-1 | Cylinder liner | 17,130 | 6 | 8 | 8 | 3112-066 |
| 19B-1 | Unloading ring with pins | 1,238 | 6 | 8 | 8 | 3135-063 |
| 19C-1 | Washer dia. 8 x 5,3 x 0,5 | 0,001 | 72 | 96 | 96 | 2114-020 |
| 19D-1 | Spring for unloading ring | 0,002 | 72 | 96 | 96 | 2142-035 |
| 19E-1 | Tension spiral | 0,040 | 6 | 8 | 8 | 2142-049 |
| 19F-1 | Ring plates for suction valve | 0,060 | 6 | 8 | 8 | 3131-064 |
| 19G-1 | Valve spring | 0,006 | 36 | 48 | 48 | 2141-050 |
| 19H-1 | Suction valve retaining plate R717 | 5,380 | 6 | 8 | 8 | 2132-058 |
| 19H-2 | Suction valve retaining plate HCFC | 5,380 | 6 | 8 | 8 | 3132-061 |
| 19J-1 | Guide ring for discharge valve | 2,180 | 6 | 8 | 8 | 3134-007 |
| 19K-1 | Gasket for cylinder liner - 0,5 mm | 0,006 | 6 | 8 | 8 | 2356-116 |
| 19K-2 | Gasket for cylinder liner - 0,8 mm | 0,010 | 6 | 8 | 8 | 2356-249 |
| 19M-1 | O-ring only TSMC HP | 0,060 | 2 | 1331-105 | ||
| 19N-1 | Socket cap screw M8x60 DIN 912 | 0,026 | 72 | 96 | 96 | 1413-364 |
| Discharge valve See drawing no 0661 -602 | ||||||
| 20-1 | Discharge valve complete R717 HP | 2 | 3136-076 | |||
| 20-2 | Discharge valve complete R22 HP | 2 | 3136-075 | |||
| 20-3 | Discharge valve complete R717 LP | 6 | 8 | 6 | 3136-078 | |
| 20-4 | Discharge valve complete R22 LP | 6 | 8 | 6 | 3136-077 | |
| 20A-1 | Discharge valve seat | 1,830 | 6 | 8 | 8 | 3133-019 |
| 20B-1 | Valve retaining plate R717 HP | 4,005 | 2 | 3132-063 | ||
| 20B-2 | Valve retaining plate R22 HP | 4,005 | 2 | 3132-062 | ||
| 20B-3 | Valve retaining plate R717 LP | 4,005 | 6 | 8 | 6 | 3132-065 |
| 20B-4 | Valve retaining plate R22 LP | 4,005 | 6 | 8 | 6 | 3132-066 |
| 20C-1 | Ring plate for discharge valve | 0,045 | 6 | 8 | 8 | 3131-065 |
| 20D-1 | Special screw | 0,415 | 6 | 8 | 8 | 2111-111 |
| 20E-1 | Nut M24 x 2 - DIN 934 | 0,094 | 12 | 16 | 16 | 1432-052 |
| 20F-1 | Spring guide | 0,040 | 6 | 8 | 8 | 2145-020 |
| 20G-1 | Valve spring (valve for 20B-1 and 2) | 0,006 | 72 | 96 | 24 | 2141-050 |
| 20G-2 | Valve spring (valve for 20B-3 and 4) | 0,006 | 36 | 48 | 36 | 2141-050 |
| 20K-1 | Guide for ring plate R717 | 0,175 | 6 | 8 | 8 | 3132-060 |
| 20K-2 | Guide for ring plate R22 | 0,180 | 6 | 8 | 8 | 3132-064 |
| Spring for safety head | ||||||
| 21-1 | Spring | 0,400 | 6 | 8 | 8 | 2142-057 |
| Oil pressure valve | ||||||
| 22-1 | Oil pressure valve complete | 0,450 | 1 | 1 | 1 | 3142-150 |
| 22G-1 | Gasket 90 x 44 x 1 | 0,001 | 1 | 1 | 1 | 2354-075 |
| 22H-1 | Hexagon head screw M12 x 35 - 8,8 DIN 933 | 0,040 | 2 | 2 | 2 | 1424-216 |
| Oil changing valve | ||||||
| 23A-1 | Oil changing valve complete | 0,300 | 1 | 1 | 1 | 2412-585 |
| 23B-1 | Threaded reducing nipple | 0,155 | 1 | 1 | 1 | 2311-059 |
| 23C-1 | Socket | 0,075 | 1 | 1 | 1 | 2313-035 |
| 23D-1 | Gasket | 0,001 | 1 | 1 | 1 | 2356-123 |
| 23E-1 | Gasket | 0,001 | 1 | 1 | 1 | 2356-140 |
| 23F-1 | Gasket | 0,001 | 1 | 1 | 1 | 2356-283 |
| 23G-1 | Nut | 0,060 | 1 | 1 | 1 | 2313-027 |
| By-pass valves | ||||||
| 24-1 | By-pass valve dia. 38 TSMC LP 12 bar | 10,240 | 1 | 2416-057 | ||
| 24-2 | By-pass valve dia. 38 SMC 18 bar | 10,215 | 1 | 1 | 2416-058 | |
| 24-3 | By-pass valve dia. 38 SMC 21 bar | 10,230 | 1 | 1 | 2416-059 | |
| 24-4 | By-pass valve dia. 38 SMC 24 bar | 10,240 | 1 | 1 | 2416-060 | |
| 24-5 | By-pass valve dia. 28 TSMC HP 22 bar | 3,600 | 1 | 3137-007 | ||
| 24-6 | By-pass valve dia. 28 TSMC HP 24 bar | 3,600 | 1 | 3137-009 | ||
| 24C-1 | O-ring for cylinder dia. 72,6 x 3,5 | 0,040 | 1 | 1 | 1 | 1331-074 |
| 24C-5 | O-ring for cylinder dia. 50,4 x 3,5 | 0,002 | 1 | 1331-067 | ||
| 24E-1 | O-ring for cover dia. 85,3 x 3,5 | 0,002 | 1 | 1 | 1 | 1331-078 |
| 24E-5 | O-ring for cover dia. 63,1 x 3,5 | 0,002 | 1 | 1331-071 | ||
| 24G-1 | Hexagon head screw M10 x 30 - 8,8 DIN 933 | 0,018 | 4 | 4 | 4 | 1424-192 |
| 24G-5 | Hexagon head screw M8 x 25,5 - 8,8 DIN 933 | 0,015 | 4 | 1424-168 | ||
| 24H-1 | Spring washer dia. 17,2/10,2 x 2 | 0,002 | 4 | 4 | 4 | 1437-033 |
| 24H-5 | Spring washer dia. 14,2/8,2 x 2 | 0,002 | 4 | 1437-023 |
| Pos. | Designation | Weight | DIM | Number each compressor | Part no. | ||
| each in kg | SMC 186 | SMC 188 | TSMC 188 | ||||
| 25-1 | Stop valves complete discharge HP | 13,700 | 65 | 1 | 2414-072 | ||
| 25-2 | Stop valves complete inlet HP | 100 | 1 | 2411-264 | |||
| 25-3 | Stop valves complete discharge LP | 100 | 1 | 1 | 1 | 2414-070 | |
| 25-4 | Stop valves complete inlet LP | 150 | 1 | 1 | 1 | 2414-037 | |
| 25A-1 | Housing | 3,080 | 65 | 1 | 2432-142 | ||
| 25A-2 | Housing | 3,210 | 100 | 1 | 2432-144 | ||
| 25A-3 | Housing | 100 | 1 | 1 | 1 | 2432-160 | |
| 25A-4 | Housing | 150 | 1 | 1 | 1 | 2432-109 | |
| 25B-1 | Valve bonnet | 3,200 | 65 | 1 | 2433-029 | ||
| 25B-2 | Valve bonnet | 4,500 | 100 | 1 | 1 | 2 | 2433-030 |
| 25B-4 | Valve bonnet | 14,660 | 150 | 1 | 1 | 1 | 2433-009 |
| 25C-1 | Front part for cone | 0,028 | 65 | 1 | 2444-092 | ||
| 25C-2 | Front part for cone | 0,520 | 100 | 1 | 1 | 2 | 2444-094 |
| 25C-4 | Front part for cone | 1,550 | 150 | 1 | 1 | 1 | 2444-006 |
| 25D-1 | Back part for cone | 4,440 | 65 | 1 | 2444-093 | ||
| 25D-2 | Back part for cone | 1,000 | 100 | 1 | 1 | 2 | 2444-095 |
| 25D-4 | Back part for cone | 5,100 | 150 | 1 | 1 | 1 | 2444-087 |
| 25E-1 | Screw for cone | 0,120 | 65-100 | 1 | 1 | 3 | 2444-018 |
| 25E-4 | Screw for cone | 0,350 | 150 | 1 | 1 | 1 | 2444-019 |
| 25F-1 | Gasket for screw | 0,001 | 65-100 | 1 | 1 | 3 | 2356-141 |
| 25F-4 | Gasket for screw | 0,001 | 150 | 1 | 1 | 1 | 2356-144 |
| 25G-1 | Threaded connection | 0,340 | 65 | 1 | 2445-054 | ||
| 25G-2 | Threaded connection | 0,400 | 100 | 1 | 1 | 2 | 2445-055 |
| 25G-4 | Threaded connection | 0,800 | 150 | 1 | 1 | 1 | 2445-049 |
| 25H-1 | Sealing ring | 0,015 | 65 | 1 | 2354-115 | ||
| 25H-2 | Sealing ring | 0,020 | 100 | 1 | 1 | 2 | 2354-117 |
| 25H-4 | Sealing ring | 0,010 | 150 | 1 | 1 | 1 | 2354-007 |
| 25J-1 | O-ring for bonnet 94,6 x 5,3 | 0,004 | 65 | 1 | 1331-161 | ||
| 25J-2 | O-ring for bonnet 116,8 x 7 | 0,006 | 100 | 1 | 1 | 2 | 1331-198 |
| 25J-4 | O-ring for bonnet 202,79 x 3,5 | 0,008 | 150 | 1 | 1 | 1 | 1331-107 |
| 25K-1 | Valve spindle | 0,420 | 65 | 1 | 2442-030 | ||
| 25K-2 | Valve spindle | 0,480 | 100 | 1 | 1 | 2 | 2442-028 |
| 25K-4 | Valve spindle | 1,000 | 150 | 1 | 1 | 1 | 2442-006 |
| 25L-1 | Lock washer | 0,015 | 65-100 | 1 | 1 | 3 | 2445-020 |
| 25L-4 | Lock washer | 0,025 | 150 | 1 | 1 | 1 | 2445-021 |
| 25M-1 | Packing gland complete | 0,250 | 65-100 | 1 | 1 | 3 | 2452-004 |
| 25M-4 | Packing gland complete | 0,350 | 150 | 1 | 1 | 1 | 2452-005 |
| 25N-1 | Guide pin dia. 5x10 | 0,003 | 65-100 | 1 | 1 | 1 | 1446-085 |
| 25N-4 | Guide screw | 0,006 | 150 | 1 | 1 | 1 | 2111-036 |
| 25P-1 | O-ring dia. 28,1 x 3,5 | 0,002 | 65-100 | 1 | 1 | 3 | 1331-024 |
| 25P-4 | O-ring dia. 31,5x3,5 | 0,003 | 150 | 1 | 1 | 1 | 1331-026 |
| 25Q-1 | Nylon washer dia. 34/22 x 1,5 | 0,002 | 100 | 1 | 1 | 3 | 2354-017 |
| 25Q-4 | Nylon washer dia. 39,5/28 x 1,5 | 0,002 | 150 | 1 | 1 | 1 | 2354-018 |
| 25R-1 | Hexagon head screw M10 x 25 8,8 - DIN 9,33 | 0,020 | 65 | 8 | 1424-191 | ||
| 25R-2 | Hexagon head screw M12 x 30 8,8 - DIN 9,33 | 0,040 | 100 | 8 | 1424-215 | ||
| 25R-4 | Hexagon head screw M20 x 65 8,8 - DIN 9,33 | 0,210 | 150 | 6 | 6 | 6 | 1424-290 |
| 25S-1 | Hand wheel dia. 140 | 0,800 | 65 | 1 | 1365-033 | ||
| 25S-2 | Hand wheel dia. 180 | 1,000 | 100 | 1 | 1 | 2 | 1365-035 |
| 25S-4 | Hand wheel dia. 230 | 1,800 | 150 | 1 | 1 | 1 | 2435-011 |
| 25T-1 | Hexagon head screw M8 x 16 | 0,010 | 65-100 | 1 | 1 | 3 | 1424-166 |
| 25T-4 | Hexagon head screw M8 x 18 | 0,010 | 150 | 1 | 1 | 1 | 1424-164 |
| 25U-1 | Washer for hand wheel dia. 28/9,5 | 0,010 | 2 | 2 | 4 | 1436-026 | |
| 25V-4 | Spring washer dia. 10 | 0,002 | 150 | 1 | 1437-033 | ||
| 25Y-1 | O-ring dia. 21,8x3,5 | 0,002 | 65-100 | 2 | 2 | 6 | 1331-020 |
| 25Y-4 | O-ring dia. 25,57 x 3,53 | 0,002 | 150 | 2 | 2 | 2 | 1331-023 |
| 25AA-1 | Gaske against frame | 0,020 | 65 | 1 | 2354-106 | ||
| 25AA-3 | Gaske against frame | 0,020 | 100 | 1 | 1 | 1 | 2354-106 |
| 25AA-4 | Gaske against frame | 0,038 | 150 | 1 | 1 | 1 | 2354-120 |
| 25AB-1 | Hexagon head screw M16 x 45 | 0,095 | 65 | 4 | 1424-102 | ||
| 25AB-3 | Hexagon head screw M16 x 45 | 0,095 | 100 | 4 | 4 | 4 | 1424-102 |
| 25AB-4 | Hexagon head screw M20 x 65 | 0,125 | 150 | 6 | 6 | 6 | 1424-290 |
| 25AC-4 | Washer | 0,014 | 150 | 6 | 6 | 6 | 1436-039 |
| 25AD-3 | Welding nipple | 1,130 | 100 | 1 | 1 | 1 | 2322-118 |
| 25AD-4 | Welding nipple | 5,420 | 150 | 1 | 1 | 1 | 2322-111 |
| 25AE-3 | Gasket for welding nipple | 0,025 | 100 | 1 | 1 | 1 | 2356-104 |
| 25AE-4 | Gasket for welding nipple | 0,040 | 150 | 1 | 1 | 1 | 2356-115 |
| 25AF-3 | Counter flange | 2,800 | 100 | 1 | 1 | 1 | 2344-005 |
| 25AF-4 | Counter flange | 4,880 | 150 | 1 | 1 | 1 | 2344-007 |
| 25AG-3 | Hexagon head screw M16 x 55 | 0,050 | 100 | 4 | 4 | 4 | 1424-104 |
| 25AG-4 | Hexagon head screw M20 x 65 | 0,125 | 150 | 6 | 6 | 6 | 1424-290 |
Sabroe Smc 116 Manual Download
| Pos. | Designation | Weight | Number each compressor | Part no. | ||
| each in kg | SMC 186 | SMC 188 | TSMC 188 | |||
| Pressure gauges and parts Suction and oil pressure gauge | ||||||
| 30A-1 | R717 | 1,640 | 1 | 1 | 1 | 1541-108 |
| 30A-2 | R12, R22andR502 | 1,640 | 1 | 1 | 1 | 1541-232 |
| 30A-3 | R22, R134a,andR404A | 1,620 | 1 | 1 | 1 | 1541-074 |
| 30B-1 | Nozzle and gasket dia. 14/08 x 1,5 | 0,001 | 1 | 1 | 1 | 3146-013 |
| 30C-1 | Gasket dia. 11/4x 1,5 | 0,001 | 1 | 1 | 1 | 2356-119 |
| 30D-1 | Cylinder head screw M4 x 20 | 0,001 | 3 | 3 | 3 | 1412-350 |
| Discharge pressure gauge SMC | ||||||
| 31A-3 | R717 | 1,380 | 1 | 1 | 1541-029 | |
| 31A-4 | R12, R22andR502 | 1,400 | 1 | 1 | 1541-160 | |
| 31A-5 | R22, R134a, and R404A | 1,400 | 1 | 1 | 1541-075 | |
| 31A-1 | Nozzle and gasket dia. 14/0,8 x 1,5 | 0,001 | 1 | 1 | 3146-013 | |
| 31C-1 | Cylinder head screw M4 x 20 | 0,001 | 3 | 3 | 1412-350 | |
| Discharge pressure gauge TSMC | ||||||
| 31A-3 | R717 | 1,600 | 1 | 1541-101 | ||
| 31A-4 | R12, R22andR502 | 1,660 | 1 | 1541-161 | ||
| 31A-5 | R22, R134a, and R404A | 1,660 | 1 | 1541-076 | ||
| 31A-1 | Nozzle and gasket dia. 14/0,8 x 1,5 | 0,001 | 2 | 3146-013 | ||
| 31C-1 | Cylinder head screw M4 x 20 | 0,001 | 3 | 1412-350 | ||
| Oil filter | ||||||
| 33-1 | Oil filter complete | 1 | 1 | 1 | 4524-037 | |
| 33A-1 | Filter element | 1 | 1 | 1 | 1517-119 | |
| 33B-1 | Gasket | 2 | 2 | 2 | 2356-104 | |
| 33C-1 | End cover | 1 | 1 | 1 | 3422-148 | |
| 33D-1 | Rod for filter | 1 | 1 | 1 | 2112-142 | |
| 33E-1 | Shield for oil filter | 1 | 1 | 1 | 2158-207 | |
| 33F-1 | Bracket with connection | 1 | 1 | 1 | 2331-049 | |
| 33G-1 | Distance piece | 1 | 1 | 1 | 2212-136 | |
| 33H-1 | Rubber gasket | 1 | 1 | 1 | 1334-012 | |
| 33J-1 | Magnet | 3 | 3 | 3 | 1517-022 | |
| 33K-1 | Iron ring | 1 | 1 | 1 | 2114-038 | |
| 33L-1 | Washer dia. 17 | 1 | 1 | 1 | 1436-034 | |
| 33M-1 | Washer dia. 24 | 1 | 1 | 1 | 1436-036 | |
| 33N-1 | Nut M8 | 1 | 1 | 1 | 1433-073 | |
| 330-1 | Nut M12 | 1 | 1 | 1 | 1433-075 | |
| 33P-1 | O-ring | 1 | 1 | 1 | 1331-009 | |
| 33Q-1 | O-ring | 1 | 1 | 1 | 1331-008 | |
| Suction filter | ||||||
| 34-1 | Suction filter oben with filter bag | 1,052 | 2 | 2 | 1 | 3425-100 |
| 34-2 | Suction filter closed with filter bag | 2,070 | 1 | 3425-102 | ||
| 24B-1 | Filter bag | 0,094 | 2 | 2 | 2 | 3425-098 |
| 34C-1 | Insert for filter bag | 0,058 | 2 | 2 | 2 | 3424-062 |
| 34D-1 | O-ring for filter dia. 132,7 x 5,3 | 0,020 | 2 | 2 | 3 | 1331-170 |
| 34E-1 | Cover | 8,210 | 2 | 2 | 1 | 3422-123 |
| 34F-1 | O-ring for cover | 0,006 | 2 | 2 | 1 | 1331-099 |
| 34G-1 | Hexagon head screw M16 x 55 | 0,050 | 8 | 8 | 4 | 1424-104 |
| 34H-1 | Spring washer dia. 16 | 0,004 | 8 | 8 | 4 | 1437-027 |
| Discharge pipe for oil pump | ||||||
| 38A-1 | Discharge pipe for oil pump | 1,395 | 1 | 1 | 1 | 3141-134 |
| 38B-1 | Connection for discharge pipe | 0,335 | 1 | 1 | 1 | 2333-050 |
| 38C-1 | O-ring dia. 28,15x3,5 | 0,002 | 1 | 1 | 1 | 1331-024 |
| 38D-1 | O-ring dia. 43,8 x 5,33 | 0,006 | 1 | 1 | 1 | 1331-033 |
| Gauge panel | ||||||
| 39A-1 | Gauge panel | 0,070 | 1 | 1 | 1 | 3146-042 |
| 39B-1 | Socket cap screw M10 x 60 | 0,050 | 2 | 2 | 2 | 1413-382 |
| 39C-1 | Liner plate for gauge panel | 0,004 | 2 | 1 | 1 | 2212-063 |
| Cooling water connection | ||||||
| 40-1 | Set of hoses and connections SMC 186 | 4,550 | 1 | 3185-058 | ||
| 40-2 | Set of hoses and connection T/SMC | 4,700 | 1 | 1 | 3185-059 | |
| 40A-1 | Hose nipple dia. 19 x 3/4' | 0,015 | 14 | 16 | 16 | 2334-026 |
| 40B-1 | Angle - 3/4' BSP | 0,136 | 8 | 10 | 10 | 1341-092 |
| 40C-1 | T-piece 1' x 3/4' x 3/4' BSP | 0,206 | 1 | 1 | 1 | 1352-030 |
| 40D-1 | Redusing socket 1' x 3/4' BSP | 0,124 | 1 | 1 | 1 | 1352-030 |
| 40E-1 | Cable binder | 0,002 | 3 | 3 | 3 | 1554-062 |
| 40F-1 | Hose ctampS 28/15 | 0,024 | 14 | 16 | 16 | 1345-183 |
| 40G-1 | T-piece 3/4' x 3/4' x 3/4' | 0,176 | 1 | 1 | 1 | 1341-143 |
| 40H-1 | Nipple 3/4' x 40 | 0,052 | 1 | 1 | 1 | 1345-040 |
| Pipe connection for gauges pressure controls and oil filter (by-pass) | ||||||
| 41A-1 | Threaded nipple 3/4' x 1/1' BSP | 1 | 1 | 1 | 2314-064 | |
| 41B-1 | Gasket dia. 34/27 x 1,5 against frame | 0,001 | 1 | 1 | 1 | 2356-140 |
| 41C-1 | Plug for banjo | 0,031 | 1 | 1 | 1 | 2314-058 |
| 41D-1 | Gasket for banjo dia. 19/14x1,5 | 0,001 | 2 | 2 | 2 | 2356-124 |
| 41E-1 | Straight screw-in joint 1/4' BSP for OD 8 | 0,044 | 1 | 1 | 1 | 1349-050 |
| 41F-1 | Threaded nipple 1/2' x 1/4' BSP | 0,110 | 1 | 1 | 1 | 2314-056 |
| 41G-1 | Gasket against frame dia. 27 x 21 | 0,001 | 1 | 1 | 1 | 2356-133 |
| 41H-1 | Plug for double banjo | 0,036 | 1 | 1 | 1 | 2314-059 |
| 41J-1 | Gasket for banjo | 0,001 | 3 | 3 | 3 | 2356-124 |
| 41K-1 | Plug for banjo | 0,040 | 1 | 1 | 1 | 2314-048 |
| 41L-1 | Gasket for banjo | 0,001 | 2 | 2 | 2 | 2356-124 |
| 41M-1 | Distributor with 2 sockets | 1 | 1 | 2 | 2333-043 | |
| 41N-1 | Straight screw-in joint 1/4' BSP for OD 8 | 0,042 | 1 | 1 | 2 | 1349-050 |
| 41P-1 | Gasket for union dia. 9/3 x 1 | 0,001 | 4 | 4 | 7 | 2356-117 |
| 41Q-1 | Angle swivel screw-joint 1/4' BSP for OD 8 | 0,100 | 1 | 1 | 2 | 1349-087 |
| 41R-1 | Threaded plug 1/4' BSP | 0,350 | 5 | 6 | 6 | 2314-022 |
| 41T-1 | Gasket for plug dia. 19/14 x 1,5 | 0,001 | 5 | 6 | 6 | 2356-124 |
| Purge valve | ||||||
| 42A-1 | Purge valve, complete | 0,300 | 1 | 1 | 1 | 2412-585 |
| 42B-1 | Threaded nipple | |||||
| 42C-1 | Cutting ring | 0,135 | 1 | 1 | 1 | 1349-062 |
| 42D-1 | Nut | |||||
| 42E-1 | Nut | 0,070 | 1 | 1 | 1 | 2313-045 |
| 42F-1 | Connection pipe with collar | 0,025 | 1 | 1 | 1 | 2334-027 |
| 42G-1 | Gasket | 0,001 | 2 | 2 | 2 | 2356-123 |
| 42H-1 | Nut | 0,060 | 1 | 1 | 1 | 2313-027 |
| Pressure controls for R717 | ||||||
| 45A-1 | KP5A | 0,300 | 1 | 1373-125 | ||
| 45B-1 | KP15A | 0,760 | 1 | 1 | 1 | 1373-142 |
| 45C-1 | MP55A | 0,900 | 1 | 1 | 1 | 1373-162 |
| Pressure controls for HCFC | ||||||
| 45D-1 | KP5 | 0,300 | 1 | 1373-123 | ||
| 45E-1 | KP15 | 0,540 | 1 | 1 | 1 | 1373-135 |
| 45F-1 | MP55 | 0,800 | 1 | 1 | 1 | 1373-159 |
| Temperature controls | ||||||
| 45G-1 | KP98 | 0,720 | 1 | 1 | 1 | 1373-043 |
| 45H-1 | KP77 | 0,350 | 1 | 1 | 1 | 1373-044 |
| 45L-1 | Phial pocket for temperature controls | 0,770 | 2 | 2 | 2 | 1377-171 |
| 45M-1 | Gasket for phial pocket dia. 27/21 x 1,5 | 0,001 | 2 | 2 | 2 | 2356-133 |
| 45N-1 | Threaded plug 1/2' BSP | 0,065 | 1 | 1 | 1 | 2314-026 |
| 45P-1 | Gasket for plug dia. 27/21 x 1,5 | 0,001 | 1 | 1 | 1 | 2356-133 |
| Coupling type 450S | ||||||
| 48A-1 | Coupling fine (2 sets) | 2,792 | 1 | 1 | 1 | 1524-161 |
| 48B-1 | Coupling bolts | 0,236 | 16 | 16 | 16 | 1524-169 |
| 48C-1 | Lock nuts | 0,056 | 16 | 16 | 16 | 1524-177 |
| 48D-1 | Washer | 0,042 | 16 | 16 | 16 | 1524-185 |
| 48E-1 | Washer | 4 | 4 | 4 | 1524-189 | |
| Capacity regulation | ||||||
| 50A-1 | Valve body with 1 solenoid valve without coil | 1 | 3143-384 | |||
| 50A-2 | Valve body with 2 solenoid valves without coils | 1 | 1 | 3143-385 | ||
| 50B-1 | Coil 220/230, 50/60 Hz, 10W | 0,260 | 1372-537 | |||
| 50B-2 | Coil 110 50/60 Hz, 10W | 0,260 | 1372-538 | |||
| 50B-3 | Coil 240 50 Hz, 10W | 0,260 | 1372-539 | |||
| 50C | Solenoid valve (service kit for 1 solenoid valve) | 1372-424 | ||||
| Crankcase heater - 3/4' BSP | ||||||
| 57A-1 | Crankcase heater - 350 W, 110 V | 0,620 | 1 | 1 | 1 | 3181-017 |
| 57A-2 | Crankcase heater - 350 W, 220 V | 0,620 | 1 | 1 | 1 | 3181-014 |
| 57B-1 | Gasker dia. 34/27 x 1,5 | 0,002 | 1 | 1 | 1 | 2356-140 |
| Crankcase heater -1 1/4' BSP | ||||||
| 57A-3 | Crankcase heater - 460 W, 110V | 1 | 1 | 1 | 3181-039 | |
| 57A-4 | Crankcase heater - 460 W, 230 V | 1 | 1 | 1 | 3181-040 | |
| 57A-5 | Crankcase heater - 460 W, 250 V | 1 | 1 | 1 | 3181-038 | |
| 57B-2 | Gasker dia.42/49 x 6,5 | 0,022 | 1 | 1 | 1 | 1349-213 |
| 80 | Solenoide valve blok, complete with 0,6 mm orifice for oil return, excl. coil | 2.040 | 1 | 1 | 1 or 2 | 1372-179 |
| Strainer kit consist of: | 1 | 1 | 1 or 2 | 1372-089 | ||
| 80E | Strainer | |||||
| 80G | Al-gasket | |||||
| Service kit consist of: | 1 | 1 | 1 or 2 | 1372-086 | ||
| 80P | Armature tube | |||||
| 80H | Armature | |||||
| 80K | O-ring | |||||
| 80M | O-ring | |||||
| 80L | Al-gasket | |||||
| 80N | Snap fastener | |||||
| Seal kit consist of: | 1 | 1 | 1 or 2 | 1372-091 | ||
| 80G | Al-gasket | |||||
| 80K | O-ring | |||||
| 80M | O-ring | |||||
| 80L | Al-gasket | |||||
| 80Q | Al-gasket | |||||
| Orifice kit 0,6 mm consist of: | 1 | 1 | 1 or 2 | 1371-034 | ||
| 80L | Al-gasket | |||||
| 80Q | Al-gasket | |||||
| 80I | Orifice 0,6 mm | |||||
| Orifice kit 0,8 mm consist of: | 1 | 1 | 1 or 2 | 1371-035 | ||
| 80L | Al-gasket | |||||
| 80Q | Al-gasket | |||||
| 80I | Orifice 0,8 mm | |||||
| Orifice kit 1,0 mm consist of: | 1 | 1 | 1 or 2 | 1371-036 | ||
| 80L | Al-gasket | |||||
| 80Q | Al-gasket | |||||
| 80I | Orifice 1,0 mm | |||||
| Orifice kit 3,3 mm (for thermopump only) consist of: | 1 | 1 | 1 or 2 | 1371-037 | ||
| 80L | Al-gasket | |||||
| 80Q | Al-gasket | |||||
| 80I | Orifice 3,3 mm | |||||
| 80J-1 | Coil 220/230V, 50/60 Hz, 10 W | 0.285 | 1372-537 | |||
| 80J-2 | Coil 110V, 50/60 Hz, 10W | 0.285 | 1372-538 | |||
| 80J-3 | Coil 240V, 50 Hz, 10W | 0.285 | 1372-539 | |||
| 80J-4 | Coil 24V, 50 Hz, 10W | 0.285 | 1372-541 | |||
| Intermediate pressure connection | ||||||
| 90A-1 | Welding flange | 5,280 | 1 | 2322-087 | ||
| 90B-1 | O-ring | 0,006 | 1 | 1331-099 | ||
| 90C-1 | Counter flange | 5,620 | 1 | 2344-010 | ||
| 90D-1 | Hexagon head screw M16 x 75 | 0,155 | 4 | 1424-108 | ||
| 90E-1 | Spring washer dia. 16 | 0,004 | 4 | 1437-027 | ||
| 90F-1 | Welding flange 160 x 160 | 3,885 | 2 | 2342-040 | ||
| 90G-1 | Gasket | 0,020 | 1 | 2354-106 | ||
| 90H-1 | Hexagon head screw M16 x 65 | 0,100 | 4 | 1424-106 | ||
| 90J-1 | Nut M16 | 0,030 | 4 | 1432-067 |
